Waste King Commercial Garbage Disposal 1000-3 - 1 hp Three Phase

    

$1,049.99
Quantity:





Waste King Commercial Garbage Disposal: 1000-3, 1 HP Three Phase

Price is for base unit. For mounting system options please call for availability.

Unit is Shown with 6" Hush Cushion.  There is a one week lead time
Base Unit Shipping Weight 42 lbs.

Waste King Commercial – Suspended Disposer

    1 HP disposer, dual voltage
    Fan cooled motor with ball bearing construction, and integral overload protection
    Dynamically balanced for smooth, long wearing operation
    Hush Cushion® mounting connection for 6″ cone or sink opening includes an auxiliary water inlet
    Stainless steel grind chamber
    Corrosion proof, glass reinforced polyester exit chamber
    6 1/4″ Diameter stainless steel turntable
    Ripper bar integrated with turntable
    2 Jam resistant, hardened stainless steel swivel impellers
    3 stainless steel under cutter blade
    Hard, tough, cast alloy grind ring with dual stage grinding action
    Lifetime particle size control by non-wearing exit slots

Features:
Motor Horsepower: 1 H.P.
Motor Speed R.P.M: 1725
Voltage: 208-220/460 volts
Phase: 3
Current-Amps: 12.0/6.0
Cycle 60
Cutting Blade: Stainless Steel
Swivel Impellers: Stainless Steel
Turntable: Stainless Steel
Bearings: Permanently Lubricated
Overload Protector: Manual Reset

———————————————————

Rough-In Dimensions with drain line connections
Waste King Commercial 1000CM - Cone Mounted Models         
Waste King Commercial 1000SM - Sink Mounted Models with #2539 Sink Mount Installation – Special Order Only


Model 1000 Application:
School cafeterias, hospitals, clinics, small to medium size restraurants with some difficult food waste. Where volume is medium to heavy.
 
Waste King® Exclusives:
• Anti-Jam Swivel Impellers rotate out of the way of an impending jam, then fall back into grinding position, pulverizing waste particles
 
• Stainless Steel Undercutter Blade located beneath the grind ring snips fibrous and stringy waste into small particles making them less likely to clog drain lines
 
• Hush-Cushions® isolate the unit from metal to metal contact, significantly reducing noise level. Hush-Cushions® are specially compounded and designed to withstand vibration and tension, and have a built-in safety splash guard

Mounting Systems - Call For Price and Availability!
Sink Mount Assembly (SM) - #2539 31/2" Bolt-in adapter for suspended models with 6" throat
Trough Mount Assembly (TM) - #2536 6" Weld-in flange for models with 6" throat
Basic Cone Assembly (B) - 12", 15", or 18" Cone with Swirl Sprays
All-Purpose Cone Assembly (AP) - 12", 15", or 18" Cone with Swirl Sprays, Silver Guard     12", 15", or 18”, Cone Cover
Dish Table Cone Assembly (DT) - 12", 15", or 18" Cone with Swirl Sprays - Scrap Ring

 
Plumbing:
Models 1000-1 and 1000-3 are equipped with a drain outlet for connection to a conventional 1 1/2" trap. The trap may be connected to a 2" branch waste line running directly into a waste stack. We recommend a slope in the waste line of not less than 1/4" per foot. Connect directly to waste line, not through a grease interceptor.
    
Motor Data:
1000-1 60 cycle 1 Phase 1 HP 1725 RPM 110-120/220-240 volts 12.0/6.0 amps 1000-3 60 cycle 3 Phase 1 HP 1725 RPM 208-240/460 volts 3.2/1.6 amps. Bearing permanently lubricated. Manual reset overload protection in motor.
          
NOTE: Disposer assembly includes disposer, mountings, and drain outlet. Other items shown in gray are available in mounting systems or ordered separately. Installation should be made in accordance with local codes. All specifications subject to change without notice. Assembly should be installed in accordance with Waste King's printed installation instructions. * Items available through Waste King
          
To Specifiers:     
So that you may be assured of receiving the fine quality you expect when you specify a WASTE KING® FOOD WASTE REMOVAL SYSTEM, we include the following sample specification for your convenience: Food waste disposer shall be 1 HP, 60 cycle, 1 Phase with 110-120/220-240 volts or 3 Phase with 208-240/460 volts. There shall be a rubber Hush Cushion® between the disposer and the cone or sink to eliminate metal to metal contact. Turntable shall be of stainless steel with jam-resistant swivel impellers of stainless steel and stainless steel cutting blade rotating below the exit slots. Grind ring shall be precision ground on all cutting surfaces and shall have non-wearing, size controlled exit slots. Disposer shall have a totally enclosed, continuous duty, fan cooled motor with integral overload protection. Unit shall be Waste King® model 1000-1 or 1000-3.

  • 1000-3 Spec SheetDownload PDF File
  • Suspended Disposer Installation ManualDownload PDF File



Detailed Product Information
  • Products Regular Price: $1049.99
  • Model: 1000-3, Triple Phase
  • Manufactured by: Waste King Commercial
  • Condition: New
  • Payments Accepted: AMEX, Visa, MasterCard, Discover and PayPal
  • Shipping Available to: United States
  • Available at: Wave Plumbing