< Shopping Cart:  0 items
Languages:
English



888-875-WAVE (9283)

Previous Orders

Waste King Commercial Disposers

Waste King Commercial Garbage Disposal: 1250-3, 1-1/4 HP Three Phase

$1,510.00

Add to Cart:

Price is for base unit. For mounting system options please call for availability.

(Shown with 6" Hush Cushion, 3-1/2 Hush Cushion also available.)
(Base Unit Shipping Weight 52 Lbs.)
Waste King Commercial 1250
Rough-In Dimensions with drain line connections
Cone Mounted Models   Sink Mounted Models with #2539 Sink Mount Installation – Special Order Only
Waste King Commercial 1250CM
Waste King Commercial 1250SM
Model 1250
 
Application
 
MEDIUM SIZE RESTAURANTS WITH SOME DIFFICULT FOOD WASTE. WHERE VOLUME IS MEDIUM TO HEAVY.
 
 
Waste King® Exclusives
 
Anti-Jam Swivel Impellers rotate out of the way of an impending jam, then fall back into grinding position, pulverizing waste particles
 
Stainless Steel Undercutter Blade located beneath the grind ring snips fibrous and stringy waste into small particles making them less likely to clog drain lines
 
Hush-Cushions® isolate the unit from metal to metal contact, significantly reducing noise level. Hush-Cushions® are specially compounded and designed to withstand vibration and tension, and have a built-in safety splash guard
 
Features
 
1 1/4 HP disposer, dual voltage
 
Fan cooled motor with ball bearing construction, and integral overload protection
 
Dynamically balanced for smooth, long wearing operation
 
Hush Cushion® mounting connection for 6" cone or sink opening includes an auxiliary water inlet
 
Stainless steel grind chamber
 
Corrosion proof, glass reinforced polyester exit chamber
 
6 1/4" Diameter stainless steel turntable
Ripper bar integrated with turntable
 
2 Jam resistant, hardened stainless steel swivel impellers with tungsten carbide inserts
 
3 stainless steel undercutter blade
 
Hard, tough, cast alloy grind ring with dual stage grinding action
 
Lifetime particle size control by non-wearing exit slots
 
 
Mounting Systems
 
Sink Mount Assembly (SM) Trough Mount Assembly (TM) Basic Cone Assembly (B) All-Purpose Cone Assembly (AP) Dish Table Cone Assembly (DT)
         
#2539 31/2" Bolt-in adapter for suspended models with 6" throat #2536 6" Weld-in flange for models with 6" throat 12", 15", or 18" Cone with Swirl Sprays 12", 15", or 18" Cone with Swirl Sprays 12", 15", or 18" Cone with Swirl Sprays
      Silver Guard 12", 15", or 18" Cone Cover
      Scrap Ring Scrap Ring
 
 
Plumbing
Models 1250-1 and 1250-3 are equipped with a drain outlet for connection to a conventional 1 1/2" trap. The trap may be connected to a 2" branch waste line running directly into a waste stack. We recommend a slope in the waste line of not less than 1/4" per foot. Connect directly to waste line, not through a grease interceptor. Waste King Commercial 1250 Cutout
 
Motor Data
 
1250-1 60 cycle 1 Phase 1 1/4 HP 1725 RPM 110-120/220-240 volts 12.8/6.4 amps 1250-3 60 cycle 3 Phase 1 1/4 HP 1725 RPM 208-240/460 volts 4.0/2.0 amps
Bearing permanently lubricated. Manual reset overload protection in motor.
     
  NOTE: Disposer assembly includes disposer, mountings, and drain outlet. Other items shown in gray are available in mounting systems or ordered separately. Installation should be made in accordance with local codes. All specifications subject to change without notice. Assembly should be installed in accordance with Waste King's printed installation instructions.
* Items available through Waste King
     
To Specifiers  
So that you may be assured of receiving the fine quality you expect when you specify a WASTE KING® FOOD WASTE REMOVAL SYSTEM, we include the following sample specification for your convenience: Food waste disposer shall be 1 1/4 HP, 60 cycle, 1 Phase with110-120/220-240 volts, or 3 Phase with 208-240/460 volts. There shall be a rubber Hush Cushion® between the disposer and the cone or sink to eliminate metal to metal contact. Turntable shall be of stainless steel with jam-resistant swivel impellers of hardened stainless steel. Turntable shall have stainless steel cutting blades rotating below the exit slots Grind ring shall be precision ground on all cutting surfaces and shall have non-wearing, size controlled exit slots. Disposer shall have a totally enclosed, continuous duty, fan cooled motor with integral overload protection. Unit shall be Waste King® model 1250-1or 1250-3.


Installation Guides
 

 
     
Waste King® by Anaheim Manufacturing Company – Copyright 2008 -2009

  • Model: 1250-3, Three Phase
  • Manufactured by: Waste King Commercial



This product was added to our catalog on Monday 13 July, 2009.