< Shopping Cart: 0 items

Languages:

888-875-WAVE (9283)

Home
Log In

Brands

Manufacturer Info

Waste King Commercial Disposers

Waste King Commercial Garbage Disposal - 750-3, 3/4 HP 3 Phase

$1,210.00

Add to Cart:

Product Description

Price is for base unit. For mounting system options please call for availability.

(Shown with 6" Hush Cushion, 3-1/2" Hush Cushion is also available.)

(Base Unit Shipping Weight 40 lbs)

Rough-In Dimensions with drain line connections
Cone Mounted Models		Sink Mounted Models with #2539 Sink Mount Installation – Special Order Only

Model 750-3, Three Phase

(Suspended Unit)

Application

School cafeterias, small coffee shops, hospitals, clinics, and short order cafes where volume is average.

	Waste King® Exclusives
	•	Anti-Jam Swivel Impellers rotate out of the way of an impending jam, then fall back into grinding position, pulverizing waste particles
	•	Stainless Steel Undercutter Blade located beneath the grind ring snips fibrous and stringy waste into small particles making them less likely to clog drain lines
	•	Hush-Cushions® isolate the unit from metal to metal contact, significantly reducing noise level. Hush-Cushions® are specially compounded and designed to withstand vibration and tension, and have a built-in safety splash guard

	Features
	•	3/4 HP disposer, dual voltage
	•	Fan cooled motor with ball bearing construction, and integral overload protection
	•	Dynamically balanced for smooth, long wearing operation
	•	Hush Cushion® mounting connection for 6" cone or sink opening includes an auxiliary water inlet
	•	Stainless steel grind chamber
	•	Corrosion proof, glass reinforced polyester exit chamber
	•	6 1/4" Diameter stainless steel turntable
	•	Ripper bar integrated with turntable
	•	2 Jam resistant, hardened stainless steel swivel impellers
	•	Stainless steel undercutter blade
	•	Hard, tough, cast alloy grind ring with dual stage grinding action
	•	Lifetime particle size control by non-wearing exit slots

Mounting Systems - Call For Price and Availability!

Sink Mount Assembly (SM)	Trough Mount Assembly (TM)	Basic Cone Assembly (B)	All-Purpose Cone Assembly (AP)	Dish Table Cone Assembly (DT)

#2539 3 1/2" Bolt-in adapter for suspended models with 6" throat	#2536 6" Weld-in flange for models with 6" throat	12", 15", or 18" Cone with Swirl Sprays	12", 15", or 18" Cone with Swirl Sprays	12", 15", or 18" Cone with Swirl Sprays
			Silver Guard	12", 15", or 18" Cone Cover
			Scrap Ring	Scrap Ring

	Plumbing
	Models 750-1 and 750-3 are equipped with a drain outlet for connection to a conventional 1 1/2" trap. The trap may be connected to a 2" branch waste line running directly into a waste stack. We recommend a slope in the waste line of not less than 1/4" per foot. Connect directly to waste line, not through a grease interceptor.

	Motor Data
	750-1 60 cycle 1 Phase 3/4 HP 1725 RPM 110-120/220-240 volts 10.6/5.3 amps 750-3 60 cycle 3 Phase 3/4 HP 1725 RPM 208-240/460 volts 2.8/1.4 amps Bearing permanently lubricated. Manual reset overload protection in motor.

	NOTE: Disposer assembly includes disposer, mountings, and drain outlet. Other items shown in gray are available in mounting systems or ordered separately. Installation should be made in accordance with local codes. All specifications subject to change without notice. Assembly should be installed in accordance with Waste King's printed installation instructions. * Items available through Waste King

	To Specifiers
	So that you may be assured of receiving the fine quality you expect when you specify a WASTE KING® FOOD WASTE REMOVAL SYSTEM, we include the following sample specification for your convenience: Food waste disposer shall be 3/4 HP, 60 cycle, 1 Phase with 110-120/220-240 volts or 3 Phase with 208-240/460 volts. There shall be a rubber Hush Cushion® between the disposer and the cone or sink to eliminate metal to metal contact. Turntable shall be of stainless steel with jam-resistant swivel impellers of stainless steel and stainless steel cutting blade rotating below the exit slots. Grind ring shall be precision ground on all cutting surfaces and shall have non-wearing, size controlled exit slots. Disposer shall have a totally enclosed, continuous duty, fan cooled motor with integral overload protection. Unit shall be Waste King® model 750-1 or 750-3.

Details

Model: 750-3, Three Phase
Shipping Weight: 15lbs
Manufactured by: Waste King Commercial

Customers who bought this product also purchased...

Shipping Fee

Reviews

There are currently no product reviews.
NOTE: Reviews may require prior approval before they will be displayed