Fantech’s RE Series direct drive centrifugal fans provide an excellent solution for residential or commercial ventilation applications where the fan must be mounted on the exterior of the building. RE models have a flat base for direct flashing to the roof. They can also be mounted on an exterior wall when roof access is not suitable.
With duct diameters from 6″ to 10″, air performance from 227 to 1008 CFM, and 100% speed controllability, these multi-purpose fans can be used to move air from one or more venting points. Interior noise is not an issue because the fan motor is located outside.
RE Fans are simple to install; no installation extras are required. The top cover is removable for access to the motor and wiring connections.
- Galvanized steel housing features baked powder-coat finish (can be painted to match decor)
- Unique external rotor motor has built-in thermal overload protection with automatic reset
- Permanently lubricated sealed ball bearings
- 100% speed controllable
- Excellent heat dissipation
- Suitable for airstream temperatures of up to 140° F
- CSA Certified
- Five-year warranty
MODEL | †A | B | C | D | E |
RE 6 | 6 | 15 1/2 | 13 3/16 | 6 1/2 | -- |
REC 6 | 6 | 15 1/2 | 13 3/16 | 6 1/2 | 1 1/2 |
RE 8XL | 8 | 20 | 15 3/4 | 6 | -- |
REC 8XL | 8 | 20 | 15 3/4 | 6 | 1 1/2 |
RE 10XL | 10 | 20 | 19 3/4 | 11 3/4 | -- |
REC 10XL | 10 | 20 | 19 3/4 | 11 3/4 | 1 1/2 |
RE 10XLT | 10 | 20 | 19 3/4 | 12 11/16 | -- |
REC 10XLT | 10 | 20 | 19 3/4 | 12 1/16 | 1 1/2 |
Dimensional information is in inches.
† Duct connections are 1/8" smaller than duct size.
